This is a Swiss key-wind, key-set, open face, pocket watch made circa 1890, dedicated (inside the back cover) in 1909 to commemorate a loved one. The case which measures 50 mm in diameter, by 73 mm from the case bottom to the top of the bow, by 20 mm thick is executed in sterling silver with a sterling dial that has raised gold Roman numerals. The dial is a handsome creation that has a wonderfully engraved center with alternate smooth and engraved banding with a neat seconds bit at the six o'clock position. The dark blue hands give it a great contrasting look that makes it easily read. The case has such great design appeal, and is in such great condition, that you will be amazed when you hold it in your hand. Our head watchmaker has it winding, setting, and keeping time just as it did over 110 years ago. If you take good care of it this wonderful pocket watch can be an heirloom for your family for the next hundred years.
The "Pie-Crust" ladies pendant watches were all the rage, circa 1895, and they are still popular, today. Elgin, the world's largest watch manufacturer made this beauty in that year. It is a seven jewel, three-quarter plate (gilded brass) movement in a yellow gold-filled, hunting case that measures 38 mm in diameter, by 54 mm (from the case bottom to the top of the bow), by 11 mm thick. It is an "O" size that is perfect for wearing on a slide chain or on a watch pin. Our head watchmaker has it winding, setting, and keeping time just as it did back in 1895. The watch sports an excellent, white, porcelain dial with Roman numerals and a seconds bit at the 6 o'clock position. The blued steel hands have spade shaped ends that indicate the hours and the minutes easily. What really makes this one stand out is the "pie crust" case edge... it is spectacular... don't miss it.
We here at Father Time have a close relationship with Elgin watches just like you do with your home town team. We get more Elgin pocket watches than almost any other company's production, due to our proximity to the Elgin area (a suburb of Chicago) and we are delighted that this is so because, Elgin was a wonderful company that made a really nice watch. The plus side for you today is that we have also purchased a large stock of Elgin parts, over the years we have been in business (38 and counting) and we can fix anything they made, with all original parts. This 7 jewel, three-quarter plate, gilded movement in a yellow gold-filled, "O" size hunting case measuring 37 mm in diameter, by 51 mm from the bottom of the case to the top of the bow, by 12 mm thick. The watch has been lovingly cared for since 1896 and our head watchmaker tells me that he thinks it is good for another 100 years, if you take good care of it. The porcelain dial is very nice and it sports black Roman numerals and blued steel hands. Notice the seconds bit at the six o'clock position and how nice the engraving is on the case lid and back. The central design is that of a star with concentric circles of smaller stars surrounding the central one. It is quite unusual and dramatic. It is a very nice hunter that can be yours. Our one-year warranty for parts and labor will allow you to enjoy it worry-free!
Waltham was the second largest American Brand (after Elgin) and they made great watches. This Ladies 3 "O" size is a case in point. It is a 19 Jewel (very high grade at the time) and solid 14k gold to boot. The 3 "O" size was the smallest standard size for a pendant watch and it proved to be very popular. It measures 34 mm in diameter, by 46 mm (from the bottom of the case to the top of the bow), by 10 mm thick. The case is a wonderful classic design with concentric center circles font and back and delicate engine turning that adorns both lids. Additionally the case middle has a rilled "Coin Edge" design for easy handling. The white porcelain dial displays Arabic Numerals with red five minute markings and the movement is as nice as they get. This size is easy to wear on a slide chain or on a pin. Our head watchmaker has it running just as it did back at the Waltham factory when it started its life in 1907. It is a beauty that is in excellent condition... mechanically and cosmetically! You won't need your "porcine companion pal" to attract attention when you go out in public, this Waltham will do the trick.
Produced between 1861 and 1871, the E. Howard series III is a very historical key-wind, key-set pocket watch. The total production was only 24,500. How many survive today is anybody's guess! Certainly there are not many left. On December 11, 1858, the Howard Watch Company was conceived for the manufacture of high grade watches. This particular watch is housed in an 4 ounce "coin silver" case and is running wonderfully. The "N" size watch is slightly larger than an American 18 size. The case measures 59 mm in diameter, by 86 mm form the case bottom to the top of the bow, by 16 mm thick (with the case closed). This 11 jewel beauty has a "Reeds Patented Barrel". On Feb. 4, 1868, Howard patented a new motor barrel that superseded the Reeds. The presence of the Reeds barrel places its manufacture between 1861 and 1868. The timing pattern on this piece reflects the precision one would expect from a Howard watch. The case shows signs of loving wear on the high points, giving it a mellow appearance. The central cartouche, on the front lid, is un-engraved and the back lid is plain polish. The porcelain dial is original to the piece and has a subtle repair just above the seconds bit. The original hands are blued steel and are quite elegant. The Roman numerals and the "E. Howard & Co. Boston" are elegantly hand-scripted just below the twelve in a small script. This is truly a definitive example of the watchmaking art form in America at that time. Here is an heirloom that your family can cherish for decades to come. Remember all of our watches come with our one-year warranty.
The Illinois Watch Company had its beginnings in several other incarnations, starting in December of 1870, in Springfield, Illinois. The two founders were John Whitfield Bunn and John C. Adams. They started the Springfield Watch Company by attracting several other investors, until they had amassed the princely sum of $100,000.00, which in those days was no small task. William B. Miller was to be their first secretary as they started production and a journey over what was to be a bumpy financial road. By 1877, after some difficulty, the company was reorganized and renamed the Illinois Springfield Watch Company and Erastus Newton Bates was chosen to lead them out of the financial difficulties they had encountered but, by July of 1878 they were once again faced with a re-organization and the name changed once again, to the Illinois Watch Company, the final iteration that we know today. The chief executive was Jacob Bunn Sr. (1814-1897) and he was an all-round entrepreneur with his fingers in finance, newspapers, land development, coal, banking, railroads, wholesale groceries, politics and even the manufacture of rope. The Bunn brothers, John & Jacob, were close friends with Abraham Lincoln, whose political career was financed and managed by them. The growth of the enterprise grew steadily from this point on under the management of the Bunn brothers. The fortunes of the company were starting to rise and by 1880, they had over 400 employees, up from 260 in 1879, and ultimately 1200 at their apex. Production was up as well from 33,285 in 1879 to 47,065 by 1880. Just ten years later, they could boast offices in New York, San Francisco, and Chicago.
With the advent of the Railroad Commission, in 1893, Illinois became one of the leading forces behind the design and manufacture of the highly accurate railroad timepieces that became world standards for accuracy and reliability. Illinois was known as the "Cadillac" of pocket watches back in the day! This watch is 16 size in a yellow gold-filled case that is in fantastic condition. This watch is a fine example of American watch making, circa 1916. The Illinois company made exceptional timepieces and this one is representative of how nice they turned out! Illinois put their heart and soul into making very accurate and elegantly engineered watches for the discerning customer. They honed their skills making railroad watches, like this one, for America's "iron horses". The nickel movement in this one has a very interesting damascening pattern in that it is a series of stripes that look really cool. The movement is an adjusted, 21 jewel, three-quarter plate, nickel marvel, that is running like a champ. Railroad watches were precisely regulated to keep the best time possible because people's lives depended on giant locomotives following a strict schedule.
Back in 1891, on April 18th, there was a head-on crash between two railroad trains just outside of Kipton, Ohio. The fast mail train #14 collided with the Toledo Express. The fast mail was running at full speed and the Toledo express was almost at a spot where it would traditionally pull over on a siding to let the fast mail pass. The massive collision killed nine men, six of them postal clerks working on the fast mail train. Investigators determined that the Toledo express crew was at fault. Their train was late and should not have started out for Kipton, knowing that the fast mail was approaching on the same line. The investigation centered on the engineer’s watches, one of which was possibly four minutes slow. A mere four minutes was the difference between life and death on the line. This is why American watch manufacturers strove to make the best possible watch one could own. This is one of those watches.
Look at the large ruby jewels and the gold jewel cups! Take a look at this wonderful porcelain dial, with its bold Arabic numerals for easy reading... it is immaculate! The bold, blued steel hand shape is easy to see for an engineer with one hand on the "Dead Mans" throttle. Additionally, the second hand, which is also blued steel, is the perfect complement to the large seconds bit at the 6 o'clock position. The plain polish, yellow gold-filled case shows only minor wear, commensurate with its age, and it looks great! This is a very nice, genuine Railroad Watch, 16 size, bold Arabic numerals, lever set, porcelain dial, screw back and bezel and a 60 Hour "Bunn Special" to boot. It has a beautiful damascening pattern on the nickel movement that just sings out for your attention. The case measures 50 mm in diameter, by 65 mm from the case bottom to the top of the bow, by 14 mm thick (including the crystal). What's not to like? Our one-year warranty, for parts and labor, will allow you to buy with complete confidence. Don't let it get away.
Waltham was a wonderful and prolific watch manufacturer located in Waltham, Ma. and they were in business from 1851 to 1957, in various iterations. Their earlier efforts, circa 1850, in Roxbury, MA, resulted in the Howard, Dennison & Davis moniker, later changed to Boston Watch Company, then Appleton, Tracey, & Co., the American Watch Co., and finally the Waltham Watch Company. They were one of the giants of the industry and second largest only to Elgin. This particular Waltham is a 21 jewel (so marked on the dial), "Riverside", adjusted to temperature and position. It is a pendant-set, yellow gold-filled case, porcelain dial (with bold, Arabic numerals), gentlemen's watch that measures 49 mm in diameter, by 60 mm from the case bottom to the top of the bow, by 13 mm thick (including the crystal). It is a screw-back, screw-bezel case and the hands are bold blued steel. There is a seconds bit at the 6 o'clock position that also has a blued steel hand. It sports strong shoulders, surrounding the crown and a non-pull-out bow. What a nice, high grade, 16 size pocket watch! It is running well - within original timing standards - just as it should. The engraved bezels (front and back) give it a handsome look. The case is yellow gold-filled and in great shape. This just may be the one for you. If so, give us a call. Our one-year warranty, for parts and labor, will allow you to buy with confidence.
Everyone who even dabbles in vintage and antique pocket watches knows that Hamilton was the best timepiece made in America and, as a consequence, there is a lot of competition for those Hamiltons that are at the top of the heap. This is one of those! It is a 23 jewel, grade 920 yellow gold filled, open face, 12 size, pendant-set, pocket watch that is adjusted to temperature and 5 positions. It sports gold screw-in jewel settings, a motor barrel, and a Breguet hairspring. It measures 47 mm in diameter, by 54 mm, from the case bottom to the top of the bow, by 11 mm thick (including the crystal). Our head watchmaker has its heart beating like the day it was made, way back in 1921, and the timing tape coming out of the Vibrograph machine is near perfect. Notice how nice the case is. It is a classic, plain polish with nicely engraved bezels, a non-pull out bow, with a screw back and a screw bezel to keep out debris and dust. The porcelain dial is in great condition and it display a red 5 minute track for added timekeeping convenience. The movement is a nickel, two-finger bridge, 23 jewel beauty that just gleams when you open the case back and cast your gaze on the striped damascening plate pattern. It is a killer... don't miss it!
We, here at Father Time, are enamored of anything Elgin and this one is no exception. It is a six size, yellow gold filled, hunting case, 11 jewel, that measures 41mm in diameter, by 58mm from the bottom of the case to the top of the bow, by 12mm thick. It is a great crossover size that can be worn by a man or a woman. It is a little larger than a typical ladies pendant watch and slightly smaller than the large, so called, "turnips" that a Victorian man might carry. This size makes it perfect for today's clothing. The case is quite handsome and it has an un-engraved, raised cartouche just waiting for your family initial to be inscribed. The overall case design is still in great shape and the lids open easily. There is a reeded-edge bezel that surrounds the Roman numeral porcelain dial and it sports three blued steel hands. You can be assured that our head watchmaker has it running like the day it left the factory, way back in 1885, and our one-year warranty, for parts and labor, will allow you to buy with complete confidence.
The National Watch Company was the beginning of the famed Elgin Watch Company (the world's largest) in Elgin Illinois. Between 1864 and 1874, they operated under the National name and, only after that time, became the Elgin National Watch Company and then, finally, just Elgin. They were a giant in the industry and their legacy looms large. Since they were only operating under the National name for ten years, the watches from that era are getting scarce. This particular one is a beauty. It is an 18 size, measuring 54mm in diameter, by 77mm from top of the bow to the bottom of the case by 19mm thick. It is a 15 jewel, key-wind, key-set, full-plate watch with a gilded movement and a porcelain dial. The hands are very fancy for that day and age. Made from blued steel they are executed in a "Butterfly" form hour hand. The dial displays Roman numerals and a very large seconds bit just below the watch center. It is quite dramatic and running like all good Elgins should. Don't let this scarce early National evade you. Our one-year warranty for parts and labor will allow you to buy with confidence!
Talk about an unusual watch... this is it. Many ladies' pendant watches were enameled but very few in a form that represents another object. This 18K Gold and Enamel "Jockey's Cap-Form Watch" is exquisite. To gild the lily, it also has its original "Jockey's Riding Crop Pin" that completes the entire theme of the piece. The Riding Crop lays across the "Lucky Horse Shoe" that sports 5 tiny rubies. From the horseshoe hangs a short length of gold mesh chain that ends in a clip used to secure the Jockey's Cap, but is removable. The overall length of the pin from the top of the horseshoe to the crown is roughly 90mm (3.6").
The cap is decorated with 3 sections of red enamel with a delicate scalloped pattern underneath. In the gold sections of the cap, the looped and dot design is executed in blue enamel. All of the enamel is in immaculate condition. Lines of texture engraved in the gold delineate the sections of the cap, as well as around the circumference of the brim/lids. It measures 27mm wide by roughly 32mm long (not including the crown or loop on the brim) by 17.5mm thick.
The top of the hat is a lid that opens to reveal the inner cover that is engraved with initials and "Dec. 3rd, 1892" which dates the piece exactly! The underside of the lid is stamped with the "18K" mark. It's a fabulous Victorian-era piece whose style still translates to today!
It was very gently treated over the hundred plus years of its existence and it has come down to us today in magnificent condition. It is worn with the underside of the cap resting against the chest, making it look like a very elegant gold & enamel pin. Once you lift it up, the dial is revealed and the object declares itself as a wonderful timepiece. The face features Louis XIV gold hands and a porcelain dial with ornate designs fired into it. The minute track features pyramidal markers in two tones: silver at the chapters and gold for the minutes. The black Arabic numerals are clear and easy to read, and an additional gold dot design in between the numerals ornaments them. Finally, a small gold radiating design around the center shaft adds some interest to the middle of the dial.
The only restoration that it required was a thorough cleaning, oiling, and regulating. It has a Swiss 10 jewel, cylinder escapement movement that is as beautiful as the day it was made. It is a "pin-set" mechanism and the crown sits at the back of the cap for easy winding. Our head watchmaker has it running like the proverbial top! Wow! This is one for the ages... don't miss it.
This is a very interesting hunting case pocket watch made by Reuge, who was famous for the manufacture of Swiss music boxes. This pocket watch has a Swiss movement for timekeeping and a Swiss musical movement that plays anytime the front lid is opened. You thereby have a lovely tune to view the time by. Musical pocket watches are few and far between and this is one that won't break the bank. This is due to the fact that it is much more modern (circa 1970's) than many of the much older watches. $30,000.00 is not an exorbitant price to pay for an antique one. So, ours is a good compromise. The case, which measures 52mm in diameter, by 73mm (from the case bottom to the top of the bow), by 15mm thick (with both lids closed). It is yellow gold plated and the back sports an external key for winding the music box. The 17 jewel Swiss movement is wound by means of the conventional crown. As an extra, added attraction, there is an oval window that allows the owner to view the gears of the music box when it is in operation. Our head watchmaker has it running perfectly and sounding like it did the day it arrived on our shores from Switzerland. It is quite unusual... don't miss it.